Thank you for visiting Ambient Technologies and GeoView at the 2019 GMEC Conference

Albert 0 1740 Article rating: No rating

Thank you for Visiting our Exhibitor Booth

and Congratulations on a Great Conference with inordinate camaraderie and sharing of ideas that produced results

 

Ambient Technologies, Inc. (ATI) and subsidiaries are certified as MBE-DBE-SBE-SDB. Our Subsidiaries include ATI Companies LLC, GeoView, Inc., ATI Energia LLC and ATI Panamericana, S.A. International Affiliate.

 

Geotechnical & Environmental Drilling, Sampling & Coring,

Installation of Geotechnical Instrumentation: Piezometers, Dilatometers, Inclinometers,

Geophysical Surveys for Geotechnical and Environmental Site Characterization, Shallow Marine Geophysical Studies, 

Non-Destructive Testing of Concrete and Foundation/Structural Evaluations,

Borehole Logging,

Utility Location, Designation and Mapping,

Mobile Solar Energy Systems

 

Congratulations and thank you for all your support to:

Matthew Sloan, P.E., Chairman

Jose N. Gomez, PE, MSc, D.GE, F.ASCE, Vice-Chair

William “Bill” Fox, PE, Secretary

Join Ambient Technologies and GeoView at the 2019 GMEC Conference April 4 & 5 at the at the Renaissance Orlando at SeaWorld

Albert 0 2358 Article rating: No rating


Please visit us at Booth # 14

 

Ambient Technologies, Inc. (ATI) and subsidiaries are certified as MBE-DBE-SBE-SDB. Our Subsidiaries include ATI Companies LLC, GeoView, Inc., ATI Energia LLC and ATI Panamericana, S.A. International Affiliate.

 


Geotechnical & Environmental Drilling, Sampling & Coring,

Installation of Geotechnical Instrumentation: Piezometers, Dilatometers, Inclinometers,

Geophysical Surveys for Site Evaluation, Environmental & Marine Geophysics, 

Non-Destructive Testing and Structural Evaluations,

Utility Location, Designation and Mapping

Mobile Solar Energy Systems


2019 GMEC Conference


Environmental Remediation Services - Throughout the State of Florida, Environmental Remediation is becoming the critical environmental service in 2019

Albert 0 2891 Article rating: No rating

Ambient Technologies, Inc. and Subsidiaries, ATI Companies LLC and GeoView, Inc. have worked successfully with consultants that were able to organize and execute the entire remediation plan from start to finish: evaluating the site, creating a strategic plan of action, implementing the plan, and maintaining the site after the remediation process concludes.

Ambient Technologies Team has worked in multiple Environmental Remediation projects and have provided the following services:

  • Drilling of Injection Wells for In Situ aquifer, groundwater and soil remediation at the remedial project site
  • Excavation removing contaminated soil or materials from a site
  • Pump-and-Pipe System to inject the chemical compounds into existing injection wells to stimulate in situ chemical oxidation of the contaminated soil and groundwater.
  • In-Situ Injections: injection of strong oxidants such as hydrogen peroxide, ozone gas, potassium permanganate or persulfates
  • Soil Vapor Extraction injecting air/steam into the ground and extracting and treating the vapors to purify the soil and groundwater
  • Soil Encapsulation permanently covering or capping contaminated soil to prevent direct contact and leaching of contaminants by rainwater infiltration
  • Environmental Geophysical Site Investigations for Delineation of Boundaries of Contaminated Soils 
  • Geophysical Surveys for Groundwater Contaminant Plume Mapping
  • Utility Location, Designation & Mapping
  • Geophysical Surveys for underground structures (UST’s, buried drums and debris)

Environmental Drilling Services – Collection of groundwater samples from various locations. Depths varying from 10 feet to 55 feet bls via DPT methods.

Kennedy Space Center, Florida National Aeronautics and Space Administration - NASA

Albert 0 22075 Article rating: No rating

ATI Companies Drilling Team completed a DPT Drilling and Sampling project at the Kennedy Space Center – NASA which included collection of multiple groundwater samples from several boring locations, reaching total depths of 55 ft below land surface, via Direct Push Technology (DPT) methods.

Using a Geoprobe 7730 DT, Ambient Technologies, Inc. (ATI) was able to accomplish the required Scope Of Work which included nine soil borings to 55 ft, forty-eight ground water samples collected direct from DPT SP16 Groundwater Sampler plus abandonment of 471 ft with a Geoprobe GS 2000 grout injection pump. A decontamination pad was built to properly steam clean and manage Investigation Derived Waste (IDW).

Decontamination of drilling equipment between samples was required.  Steam cleaning was used for decontamination. 

Pressure grouting method was required to abandon each borehole.  A GS 2000 Grout System was used. This process consisted of pumping grout through SP probe rods to the bottom of the open borehole. Once the grout level reached the elevation of the water table the remaining portion of the borehole was abandoned by the direct pouring of grout or tremie grouting methods to complete the abandonment of the borehole.
RSS
First4567891113

Theme picker